Medical Gas Sources
Liquid oxygen tanks, oxygen generators, cylinder manifolds, medical air plants, vacuum plants and AGSS units.
Products in this category
19 products
Medical Oxygen Manifold
Cylinder bank changeover unit that feeds the medical gas pipeline at a stable regulated pressure.
View product
Liquid Oxygen Tank
Bulk liquid medical oxygen storage that feeds the facility pipeline at high flow rates with long autonomy.
View product
Medical Oxygen Generator
On-site medical oxygen generation plant that produces oxygen from ambient air to feed the facility pipeline.
View product
Medical Air Plant
Medical air plant with compressors, dryers and filters delivering clean, dry air to the pipeline.
View product
AGSS Plant
Anaesthetic gas scavenging plant that extracts waste gases from anaesthetising areas and discharges them outdoors.
View product
Medical Suction Pump
Medical suction pump supplying the vacuum network with stable negative pressure across critical areas.
View product
MILS HOSPITAIR Medical Air Plant
A family of centralised medical air plants with screw compressors and a full treatment and drying train.
View product
MILS SCROLAIR Oil-Free Medical Air Plant
A medical air plant with oil-free scroll compressors that removes the risk of oil carry-over into the pipeline.
View product
MILS AIRMIL’S Technical Air Plant
A technical air plant for supporting services in the facility such as sterilisers, laundry and pneumatic doors.
View product
MILS PRO2XY Medical Oxygen Generator
An on-site PSA/VPSA medical oxygen generator producing Oxygen 93 and reducing dependence on external supply.
View product
MILS Oxygen Cylinder Filling Station
An on-site oxygen cylinder filling station installed with the oxygen generator to give the facility self-sufficiency.
View product
MILS HOSPIVAC Medical Vacuum Plant
A family of centralised medical vacuum plants with multiple pumps, a receiver and bacterial filters feeding the vacuum pipeline.
View product
MILS MINIVAC Compact Vacuum Plant
Compact and mobile medical vacuum plants for small and medium facilities and for temporary or emergency use.
View product
MILS ANAESTIVAC AGSS Plant
An AGSS plant that extracts and disposes of waste anaesthetic gases from theatres to outside the building.
View product
MILS LABOVAC Laboratory Vacuum System
A laboratory vacuum system with chemically resistant components and vapour or liquid separation.
View productCMS Medical Gas Manifold
A medical gas cylinder manifold available as automatic, manual, emergency standby (ESM) and high-flow versions.
View productP3 Medical Gas Manifolds
Manual, emergency reserve and emergency standby cylinder manifolds with a multi-stage regulator controlling up to 500 l/min.
View productP3 VIE Control Panels
A duplex-regulator control panel for the liquid oxygen VIE, delivering 1,500–6,000 l/min with one regulator isolated.
View productP3 Medical Air Plants
Medical air plants with screw compressors from duplex to hexaplex, duplex desiccant drying and electronic controls.
View product
Applications
- Hospitals and medical centres
- Operating theatres and intensive care
- Emergency and inpatient departments
- Dialysis centres
- Clinics and day-surgery centres
- Laboratories and supporting medical applications
- Hospitals and medical complexes
- Operating theatres and intensive care units
- Day-surgery centres and clinics
- Expansion and refurbishment projects in healthcare facilities
Related services
Medical Gas System Design
Medical gas system design: terminal unit take-off, load calculation, source and pipe sizing, distribution and isolation drawings, and alarm requirements — to the project's approved specification.
Medical Gas Pipeline Installation
Medical gas pipeline installation: source installation, brazing of medical copper under inert gas, supports and labelling, isolation valves and AVSU units, outlets and bed head units, and preparation for testing.
Medical Gas Testing & Commissioning
Pre-handover medical gas testing and commissioning: pressure and leak testing, cross-connection testing, purging, purity and gas identity verification, terminal unit flow testing and alarm testing — with documented reports.
Medical Gas System Maintenance
Medical gas maintenance programmes: source and manifold inspection, valve and AVSU review, alarm panel testing, outlet checks, fault rectification and existing-system assessment with documented condition reports.
Medical Gas Systems & Components Supply
Supply of medical gas components: manifolds, air and vacuum plants, degreased medical copper, isolation valves and AVSU units, alarm panels, outlets and bed head units — matched to the project specification.
Related technical articles
What Are Medical Gas Systems?
An engineering overview of a hospital Medical Gas System: sources, pipeline, control and terminal units.
Medical Oxygen Systems
Medical Oxygen sources — cylinders and manifolds, liquid oxygen tanks and generators — and how the right source is selected for a facility.
Medical Air Systems
How Medical Air is generated, treated and distributed in a hospital, and how it differs from surgical tool air.
Medical Vacuum Systems
How a Medical Vacuum system works, and why traps, filters and the exhaust route are core parts of its design.
Medical Gas Pipeline Design
A design methodology for the Medical Gas Pipeline: from load calculation and zoning to routing and isolation points.
Medical Gas Manifolds
How a Medical Gas Manifold works with alternating banks, and where it serves as a primary or reserve source.
Medical Gas System Testing
The pre-handover test sequence for medical gas systems: pressure and leak, cross-connection, purity, flow and alarms.
Medical Gas System Maintenance
How to build a preventive maintenance programme for medical gas systems, and what to inspect and document at each visit.
Other categories in this sector
Have a project or an existing facility that needs an engineering review?
Our engineering team can review your requirement and propose a solution suited to the application, the site and the applicable requirements.