Normally Closed Gas Solenoid Valve 1 inch
Normally Closed Gas Solenoid Valve 1 inch
A normally closed valve stays shut at rest and opens only with power present and a valid enable signal, making it a safe choice for facilities where gas must stop immediately on any fault or power loss.
What is it?
The valve is installed on the main gas line and interlocked with the detection control panel and the emergency stop button, cutting supply within moments when a gas concentration is detected or the emergency button is pressed. Size and coil voltage are selected per network design, flow rate and required operating pressure.
Features
- Automatic closure on power failure
- Direct interlock with the detection panel
- Fast response to emergency stop commands
- Installed on the main line upstream of distribution
- Multiple sizes to match network capacity
- Manual reset after the cause is cleared
Applications
- Villas and residential compounds
- Restaurants, cafés and central kitchens
- Hotels, halls and hospitality facilities
- Hospitals and educational facilities
- Bakeries and food factories
- Industrial facilities and central gas stations
Technical specifications
- Size
- 1 inch
- Pressure
- 360 bar
- Operation
- Automatic
Brand / Manufacturer
- Brand
- Madas
Related services
LPG Central Gas System Design
LPG central gas design for villas, restaurants and facilities: appliance load calculation, tank size and location, pressure reduction stages, network routing and the scope of leak detection and emergency shut-off.
LPG Systems & Components Supply
Supply of LPG system components: tanks and accessories, pressure regulators, filters, manual and solenoid valves, meters, rigid and flexible pipe, gas detectors and control panels.
LPG Central Gas Installation
LPG network installation: tank base preparation and setting, pressure reduction stages, main and branch pipework, meters, appliance connections, and installation of leak detection and emergency shut-off.
LPG Testing & Commissioning
LPG network testing and commissioning: pressure and tightness testing, joint inspection, regulator setting, leak detector and emergency shut-off testing, and appliance commissioning with documented reports and handover.
LPG Central Gas Maintenance
LPG system maintenance: tank, regulator and filter inspection, valve and meter checks, leak detector and emergency shut-off testing, leak surveys and fault rectification, with a condition report after every visit.
Related products
Normally Closed Gas Solenoid Valve DN65
Normally closed solenoid valve that automatically cuts gas supply on power loss or a leak alarm.
Normally Closed Gas Solenoid Valve DN150
Normally closed solenoid valve that automatically cuts gas supply on power loss or a leak alarm.
Normally Open Gas Solenoid Valve
Normally open solenoid valve that stays open in service and closes on an alarm command.
Related technical articles
Gas Leak Detection & Alarm Systems
In preparation
LPG Testing & Commissioning
In preparation
LPG System Safety
In preparation
Frequently asked questions
What happens on a power outage?
The valve closes automatically and gas flow stops; supply resumes only after a deliberate reset once the network is confirmed safe.
Have a project or an existing facility that needs an engineering review?
Our engineering team can review your requirement and propose a solution suited to the application, the site and the applicable requirements.