Gas Meter G2.5 Aluminium
Gas Meter G2.5 Aluminium
A meter turns central gas into a measurable, billable service: it records actual consumption for each dwelling, shop or kitchen, and also reveals abnormal consumption that may indicate a leak or a faulty appliance.
What is it?
The meter is installed in a well-ventilated position that is easy to read and service, with an isolation valve upstream and a filter where required. Sizing (G2.5, G4 …) follows the maximum expected flow for the unit: an undersized meter causes pressure loss, while an oversized one reduces accuracy at low loads.
Features
- Accurate consumption measurement per unit
- A fair basis for tenant billing
- Helps reveal abnormal consumption
- Sizes matched to the flow rate
- Ventilated position that is easy to read
- Isolation valve upstream for maintenance
Applications
- Villas and residential compounds
- Restaurants, cafés and central kitchens
- Hotels, halls and hospitality facilities
- Hospitals and educational facilities
- Bakeries and food factories
- Industrial facilities and central gas stations
Brand / Manufacturer
- Brand
- Boldrin
- Model
- G2.5
Related services
LPG Central Gas System Design
LPG central gas design for villas, restaurants and facilities: appliance load calculation, tank size and location, pressure reduction stages, network routing and the scope of leak detection and emergency shut-off.
LPG Systems & Components Supply
Supply of LPG system components: tanks and accessories, pressure regulators, filters, manual and solenoid valves, meters, rigid and flexible pipe, gas detectors and control panels.
LPG Central Gas Installation
LPG network installation: tank base preparation and setting, pressure reduction stages, main and branch pipework, meters, appliance connections, and installation of leak detection and emergency shut-off.
LPG Testing & Commissioning
LPG network testing and commissioning: pressure and tightness testing, joint inspection, regulator setting, leak detector and emergency shut-off testing, and appliance commissioning with documented reports and handover.
LPG Central Gas Maintenance
LPG system maintenance: tank, regulator and filter inspection, valve and meter checks, leak detector and emergency shut-off testing, leak surveys and fault rectification, with a condition report after every visit.
Related products
Gas Meter G2.5 Stainless Steel
Gas meter that measures actual consumption per unit or tenant on the central network.
Gas Meter G4 Stainless Steel
Gas meter that measures actual consumption per unit or tenant on the central network.
Italian Gas Meter
Gas meter that measures actual consumption per unit or tenant on the central network.
Related technical articles
What is Central Gas?
In preparation
Central Gas for Villas
In preparation
LPG for Restaurants & Kitchens
In preparation
Frequently asked questions
How is meter size selected?
By calculating the maximum expected appliance flow with a diversity factor, then choosing the size that covers this load without excessive pressure loss and without oversizing that degrades accuracy at low loads.
Have a project or an existing facility that needs an engineering review?
Our engineering team can review your requirement and propose a solution suited to the application, the site and the applicable requirements.